Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
url-filter high-performance mode enable
Function
The url-filter high-performance mode enable command enables the high-performance URL filtering function.
The undo url-filter high-performance mode enable command disables the high-performance URL filtering function.
Usage Guidelines
Usage Scenario
By default, the high-performance URL filtering function is disabled.
If only the URL filtering
profile is configured in the security policy and the URL filtering
function filters a large volume of HTTP/HTTPS traffic, you can run
this command to enable the high-performance URL filtering function
to improve the performance of URL filtering. After this function is
enabled:
- Non-HTTP/-HTTPS traffic is directly permitted.
- For HTTP/HTTPS traffic, the URL filtering function filters only the first URL extracted from each session and uses the filtering action for this URL as the action for the entire session.
Previous
