No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
u-apsd enable

u-apsd enable


The u-apsd enable command enables the Unscheduled Automatic Power Save Delivery (U-APSD) function.

The undo u-apsd enable command disables the U-APSD function.

By default, the U-APSD function is disabled.


u-apsd enable

undo u-apsd enable




SSID profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

U-APSD is a new energy saving mode defined for WMM, which can improve the energy-saving capability of STAs.

If some STAs on the network do not support the U-APSD function, disable the U-APSD function.


The U-APSD function takes effect only when WMM is enabled.

After the U-APSD function is enabled, services may be interrupted.


# Enable the U-APSD function.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ssid-profile name ssid1
[Huawei-wlan-ssid-prof-ssid1] u-apsd enable
Warning: This action may cause service interruption. Continue?[Y/N]y
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 199235

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next