No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
interface loopback

interface loopback

Function

The interface loopback command creates a loopback interface.

The undo interface loopback command deletes a loopback interface.

Format

interface loopback loopback-number

undo interface loopback loopback-number

Parameters

Parameter Description Value
loopback-number Specifies the number of a loopback interface. The value is an integer that ranges from 0 to 1023.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

A loopback interface is always Up at the physical layer and link layer unless it is manually shut down.

A loopback interface is always Up at the physical layer and link layer unless it is manually shut down.

The IP address of a loopback interface is usually specified as the source address of packets.

Example

# Create loopback interface 5.

<Huawei> system-view
[Huawei] interface loopback 5
[Huawei-LoopBack5]
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 201336

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next