No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ad-server authentication manager

ad-server authentication manager

Function

By default, no administrator DN and password of an AD authentication server is configured.

Format

ad-server authentication manager manager-dn password [ repassword ]

undo ad-server authentication manager

Parameters

Parameter Description Value
manager-dn Specifies the administrator DN of an AD authentication server.

If the manager-dn value does not contain any space, its length ranges from 1 to 180 characters. If the manager-dn value contains spaces, its length ranges from 3 to 182 characters, and you must enclose the manager-dn value with double quotation marks ("), for example, "cn=test manager,cn=users".

This parameter must be used together with the ad-server authentication manager-with-base-dn enable command. For example, the administrator account is under Base DN example.com and belongs to the users group. In this case, set the administrator DN to either of the following values:
  • cn=administrator,cn=users if ad-server authentication manager-with-base-dn enable.
  • cn=administrator,cn=users,dc=example,dc=com if undo ad-server authentication manager-with-base-dn enable.
password Specifies the administrator password of an AD authentication server.

The value is a string that contains 1 to 31 characters in simple text or 68 characters in cipher text. The simple text string cannot contain & or ". If the string has 1 to 16 characters, the cipher text is 48-byte long; if the string has 17 to 31 characters, the cipher text is 68-byte long.

NOTE:

To enhance security, the password of the AD administrator is recommended to meet the minimum strength requirements, that is, it needs to contain at least three types of the following characters: upper-case letters, lower-case letters, digits (0 to 9), and special characters such as exclamation points (!), at signs (@), number signs (#), dollar signs ($), and percent (%), and contains at least six characters.

repassword Re-enters the administrator password of an AD authentication server. The value must be the same as that of password.

Views

AD server template view

Default Level

3: Management level

Usage Guidelines

To configure the DN and password of an AD administrator, run the ad-server authentication manager command. If the ad-server authentication manager-anonymous enable command has been executed to allow anonymous access to the AD server, the configuration will be deleted after ad-server authentication manager is run.

Example

# Set the administrator DN and password of an AD authentication server to cn=manager and Admin@123 respectively.

<Huawei> system-view
[Huawei] ad-server template temp1
[Huawei-ad-temp1] ad-server authentication manager cn=manager Admin@123 Admin@123
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204679

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next