No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
eapol-start dest-address transform-condition

eapol-start dest-address transform-condition

Function

The eapol-start dest-address transform-condition command specifies the EAPOL-start packets to be encapsulated by an AP.

The undo eapol-start dest-address transform-condition command restores the default settings.

By default, an AP encapsulates only the EAPOL-start packets with the destination MAC addresses being the AP's BSSID.

Format

eapol-start dest-address transform-condition { always | equal-bssid }

undo eapol-start dest-address transform-condition

Parameters

Parameter

Description

Value

always

Configures the AP to encapsulate all EAPOL-start packets.

-

equal-bssid

Configures the AP to encapsulate only the EAPOL-start packets with the destination MAC address being the AP's BSSID.

-

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The destination MAC addresses of the EAPOL-start packets sent by some STAs are APs' BSSIDs, but the destination MAC addresses of the EAPOL-start packets sent by other STAs are not APs' BSSIDs. You need to run this command to specify the EAPOL-start packets to be encapsulated.

Precautions

The packet types specified by the eapol-start dest-address transform-condition and eapol-start dest-address transform-to commands must be the same.

Example

# Configure the AP to encapsulate all EAPOL-start packets.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ap-system-profile name ap-system1
[Huawei-wlan-ap-system-prof-ap-system1] eapol-start dest-address transform-condition always  
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211500

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next