No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
correlation-analyze enable

correlation-analyze enable


The correlation-analyze enable command enables alarm correlation analysis.

The undo correlation-analyze enable command disables alarm correlation analysis.

By default, alarm correlation analysis is disabled.


correlation-analyze enable

undo correlation-analyze enable




Alarm view

Default Level

3: Management level

Usage Guidelines

A lot of alarms are generated in a running system and reported to the NMS. If non-root-cause alarms are unimportant, you can run the correlation-analyze enable command to enable alarm correlation analysis to distinguish between root-cause alarms and non-root-cause alarms. After alarm correlation analysis is enabled, the system analyzes types of alarms. For a non-root-cause alarm, the system marks the sequence number of its root-cause alarm on the non-root-cause alarm.


# Enable alarm correlation analysis.

<Huawei> system-view
[Huawei] alarm
[Huawei-alarm] correlation-analyze enable
Info: Enable analyze correlation between alarms successfully       
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 206724

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next