No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe priority (AP wired port link profile view)

poe priority (AP wired port link profile view)


The poe priority command sets the power priority of a PoE interface.

The undo poe priority command restores the default power priority of a PoE interface.


poe priority { critical | high | low }

undo poe priority



AP wired port link profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When the output power of a device is insufficient, the device provides power for the interfaces of the higher power supply priorities first and cuts off power of the interfaces of the lower power supply priorities. If all the interfaces are of the same priority, the power supply priority of the interface with a smaller interface number is higher.


This command takes effect only on the AD9430DN-24 and AD9431DN-24X.


# Set the power priority of a central AP's interface to Critical.
<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] port-link-profile name port-link1
[Huawei-wlan-port-link-prof-port-link1] poe priority critical
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211594

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next