No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lldp tlv-enable legacy-tlv four-pair-power (AP wired port link profile view)

lldp tlv-enable legacy-tlv four-pair-power (AP wired port link profile view)

Function

The lldp tlv-enable legacy-tlv four-pair-power command configures an AP's wired interface to advertise Cisco's proprietary TLVs.

The undo lldp tlv-enable legacy-tlv four-pair-power command prohibits an AP's wired interface from advertising Cisco's proprietary TLVs.

By default, an AP's wired interface advertises Cisco's proprietary TLVs.

Format

lldp tlv-enable legacy-tlv four-pair-power

undo lldp tlv-enable legacy-tlv four-pair-power

Parameters

None

Views

AP wired port link profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Some Cisco's switches use proprietary LLDP TLVs to negotiate the UPoE power supply. If such a switch is used to supply UPoE power to an AP, the AP's wired interface connected to the switch must be enabled to advertise Cisco's proprietary TLVs for UPoE power negotiation. Otherwise, LLDP negotiation fails. If interfaces on the Cisco's switch do not supply UPoE power, the AP is provided with insufficient input power and cannot work properly.

Example

# Configure an AP's wired interface to advertise Cisco's proprietary TLVs.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] port-link-profile name port-link1
[Huawei-wlan-port-link-prof-port-link1] lldp tlv-enable legacy-tlv four-pair-power
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202414

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next