No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-network-detect disable

sta-network-detect disable

Function

The sta-network-detect disable command disables the device from monitoring user traffic and forcibly disconnecting STAs without traffic.

The undo sta-network-detect disable command enables the device to monitor user traffic and forcibly disconnect STAs without traffic.

By default, the device is enabled to monitor user traffic and forcibly disconnect STAs without traffic.

Format

sta-network-detect disable

undo sta-network-detect disable

Parameters

None

Views

VAP profile view

Default Level

2: Configuration level

Usage Guidelines

After the device is enabled to monitor user traffic and forcibly disconnect STAs without traffic, a STA meeting all the following conditions is forcibly disconnected after reassociation and going online:
  • The STA does not send DHCP Request messages or receive ARP Reply packets within 5s after going online.
  • The IP address of the STA changes after roaming.
  • The STA has only uplink traffic but no downlink traffic.

When you do not require user traffic monitoring or want to prevent STAs from being forcibly disconnected, run the sta-network-detect disable command.

Example

# Enable the device to monitor user traffic and forcibly disconnect STAs without traffic.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] vap-profile name vap1
[Huawei-wlan-vap-prof-vap1] undo sta-network-detect disable
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203384

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next