No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
interface wlan-radio

interface wlan-radio

Function

The interface wlan-radio command displays the radio interface view.

Format

interface wlan-radio wlan-radio-number

Parameters

Parameter

Description

Value

wlan-radio-number

Displays the specified radio interface view.

The value can be:
  • 0/0/0
  • 0/0/1
  • 0/0/2
NOTE:

All types of APs support 2.4 GHz and 5 GHz radio interfaces.

On APs supporting radio switching between the 2.4 GHz and 5 GHz frequency bands, some radios support both the two bands. However, such radios can work on one band at a time. You can run the frequency command to change the working frequency band of Radio 0.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

  • You can configure the radio after enter the wlan-radio interface.
  • you can create a VAP by binding a VAP profile to WLAN-radio interface.

Example

# Display the view of Wlan-Radio0/0/0.

<Huawei> system-view
[Huawei] interface wlan-radio0/0/0 
[Huawei-Wlan-Radio0/0/0]  
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205355

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next