No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
priority-map dscp (Mesh profile view)

priority-map dscp (Mesh profile view)

Function

The priority-map dscp command configures the mapping from DSCP priorities to 802.11e user priorities on the Mesh air interface.

The undo priority-map dscp command restores the default mapping from DSCP priorities to 802.11e user priorities on the Mesh air interface.

Table 14-16 describes the mapping from DSCP priorities to 802.11e user priorities by default.
Table 14-16  Mapping from DSCP priorities to 802.11e user priorities

DSCP Priority

802.11e User Priority

0-7

0

8-15

1

16-23

2

24-31

3

32-39

4

40-47

5

48-55

6

56-63

7

Format

priority-map dscp { dscp-value1 [ to dscp-value2 ] } &<1-10> dot11e dot11e-value

undo priority-map dscp

Parameters

Parameter

Description

Value

dscp dscp-value1

Specifies the DSCP priority of 802.3 packets.

The value is an integer that ranges from 0 to 63. A larger value indicates a higher priority.

to dscp-value2

Specifies the DSCP priority of 802.3 packets.

The value is an integer that ranges from 0 to 63. A larger value indicates a higher priority.

dot11e dot11e-value

Specifies the 802.11e user priority.

The value is an integer that ranges from 0 to 7. A larger value indicates a higher priority.

Views

Mesh profile view

Default Level

2: Configuration level

Usage Guidelines

On a Mesh network, you can run this command to configure the mapping from DSCP priorities to 802.11e user priorities on the Mesh air interface of an AP.

Example

# Map DSCP priorities 0-6 to 802.11e user priority 0 on the Mesh air interface.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] mesh-profile name test
[Huawei-wlan-mesh-prof-test] priority-map dscp 0 to 6 dot11e 0
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 195050

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next