No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display wired-port-profile

display wired-port-profile

Function

The display wired-port-profile command displays reference and configuration information about an AP wired port profile.

Format

display wired-port-profile { all | name profile-name }

Parameters

Parameter

Description

Value

all

Displays information about all AP wired port profiles.

-

name profile-name

Displays information about a specified AP wired port profile.

The AP wired port profile must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display wired-port-profile command to view configuration and reference information about an AP wired port profile.

Example

# Display information about all AP wired port profiles.

<Huawei> display wired-port-profile all
----------------------------------------------------------
Profile name                   Reference
----------------------------------------------------------
default                        1
wired-port-profile-1           0
----------------------------------------------------------
Total: 2
Table 18-51  Description of the display wired-port-profile all command output

Item

Description

Profile name

Name of an AP wired port profile.

Reference

Number of times an AP wired port profile is referenced.

# Display information about the AP wired port profile default (Eth-trunk is not configured).

<Huawei> display wired-port-profile name default
----------------------------------------------------------------------------
Port link profile             : default
Description                   :
STP                           : disable
Port work mode                : root
Port Tagged VLAN              : -
Port untagged VLAN            : 1
Port PVID VLAN                : -
User isolate mode             : disable
Traffic filter inbound(IPv4)  : -
Traffic filter outbound(IPv4) : -
Traffic filter inbound(L2)    : -
Traffic filter outbound(L2)   : -
Traffic remark inbound(IPv4)  : -
Traffic remark outbound(IPv4) : -
Traffic remark inbound(L2)    : -
Traffic remark outbound(L2)   : -
DHCP trust port               : enable
ND trust port                 : -
IPSG switch                   : disable
DAI switch                    : disable
STP auto shutdown switch      : disable
Auto shutdown recovery time   : 600
Learn client IPv4 address switch   : disable
IGMP-Snooping switch          : disable
Traffic optimize TCP adjust MSS(bytes)         : 1380
Traffic optimize broadcast suppression(pps)    : -
Traffic optimize unicast suppression(pps)      : -
Traffic optimize multicast suppression(pps)    : -
----------------------------------------------------------------------------

# Display information about the AP wired port profile dj (Eth-trunk is configured).

<Huawei> display wired-port-profile name dj
----------------------------------------------------------------------------    
Port link profile             : default                                         
Description                   :                                                 
Ethernet trunk ID             : 0                                               
----------------------------------------------------------------------------  
Table 18-52  Description of the display wired-port-profile name profile-name command output

Item

Description

Port link profile

Name of the AP wired port link profile referenced by an AP wired port profile.

To configure the parameter, run the port-link-profile (AP wired port profile view) command.

Description

Interface description.

To configure the parameter, run the description (AP wired port profile view) command.

STP

STP status on a wired interface.

To configure the parameter, run the stp enable (AP wired port profile view) command.

Port work mode
Working mode of a wired interface.
  • root: indicates the root mode.
  • endpoint: indicates the endpoint mode.
  • middle: indicates the middle mode.
  • -: indicates that the working mode of wired interfaces is not changed.

To configure the parameter, run the mode (AP wired port profile view) command.

Port Tagged VLAN

VLAN to which a wired interface is added in tagged mode.

To configure the parameter, run the vlan (AP wired port profile view) command.

Port untagged VLAN

VLAN to which a wired interface is added in untagged mode.

To configure the parameter, run the vlan (AP wired port profile view) command.

Port PVID VLAN

PVID of a wired interface.

To configure the parameter, run the vlan pvid (AP wired port profile view) command.

User isolate mode

User isolation status on a wired interface.

To configure the parameter, run the user-isolate (AP wired port profile view) command.

Traffic filter inbound(IPv4)

IPv4 ACL in the inbound direction.

To configure the parameter, run the traffic-filter (AP wired port profile view) command.

Traffic filter outbound(IPv4)

IPv4 ACL in the outbound direction.

To configure the parameter, run the traffic-filter (AP wired port profile view)h command.

Traffic filter inbound(L2)

Layer 2 ACL in the inbound direction.

To configure the parameter, run the traffic-filter (AP wired port profile view) command.

Traffic filter outbound(L2)

Layer 2 ACL in the outbound direction.

To configure the parameter, run the traffic-filter (AP wired port profile view) command.

Traffic remark inbound(IPv4)

Priority re-marking for incoming traffic based on the IPv4 ACL.

To configure the parameter, run the traffic-remark (AP wired port profile view) command.

Traffic remark outbound(IPv4)

Priority re-marking for outgoing traffic based on the IPv4 ACL.

To configure the parameter, run the traffic-remark (AP wired port profile view) command.

Traffic remark inbound(L2)

Priority re-marking for incoming traffic based on the Layer 2 ACL.

To configure the parameter, run the traffic-remark (AP wired port profile view) command.

Traffic remark outbound(L2)

Priority re-marking for outgoing traffic based on the Layer 2 ACL.

To configure the parameter, run the traffic-remark (AP wired port profile view) command.

DHCP trust port

Status of the DHCP trusted interface function.

To configure the parameter, run the dhcp trust port command.

ND trust port

Status of the ND trusted interface function.

Ethernet trunk ID

ID of the Eth-Trunk interface.

IPSG switch

Whether IP source guard (IPSG) is enabled on an AP's wired interface.

To configure the parameter, run the ipsg enable (AP wired port profile view) command.

DAI switch

Whether DAI is enabled on an AP's wired interface.

To configure the parameter, run the dai enable (AP wired port profile view) command.

STP auto shutdown switch

Whether STP-triggered port shutdown is enabled on an AP's wired interface.

To configure the parameter, run the stp auto-shutdown enable (AP wired port profile view) command.

Auto shutdown recovery time

Recovery time of the shutdown port triggered by STP.

To configure the parameter, run the stp auto-shutdown recovery-time (AP wired port profile view) command.

Learn client IPv4 address switch

Whether terminal IPv4 address learning is enabled on an AP's wired interface.

To configure the parameter, run the learn-client-address (AP wired port profile view) command.

IGMP-Snooping switch

Whether IGMP snooping is enabled on an AP's wired port.

To configure the parameter, run the igmp-snooping enable (AP wired port profile view) command.

Traffic optimize TCP adjust MSS(bytes)

Maximum segment size (MSS) of TCP packets on an AP's wired interface.

To configure the parameter, run the traffic-optimize tcp adjust-mss command.

Traffic optimize broadcast suppression(pps)

Maximum broadcast traffic volume allowed on an AP's wired interface.

To configure the parameter, run the traffic-optimize (AP wired port profile view) command.

Traffic optimize unicast suppression(pps)

Maximum unknown unicast traffic volume allowed on an AP's wired interface.

To configure the parameter, run the traffic-optimize (AP wired port profile view) command.

Traffic optimize multicast suppression(pps)

Maximum multicast traffic volume allowed on an AP's wired interface.

To configure the parameter, run the traffic-optimize (AP wired port profile view) command.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 198912

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next