No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
smart-roam quick-kickoff-threshold disable

smart-roam quick-kickoff-threshold disable

Function

The smart-roam quick-kickoff-threshold disable command disables the function of quickly disconnecting STAs.

The undo smart-roam quick-kickoff-threshold disable command enables the function of quickly disconnecting STAs.

By default, the function of quickly disconnecting STAs is enabled for cloud APs and disabled for Fat APs.

Format

smart-roam quick-kickoff-threshold disable

undo smart-roam quick-kickoff-threshold disable

Parameters

None

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the function of quickly disconnecting STAs is enabled using the undo smart-roam quick-kickoff-threshold disable command, and the threshold for quickly disconnecting STAs is specified, the AP disconnects STAs whose SNR or access rate is lower the specified threshold. The STAs then can connect to another AP with stronger signals.

Follow-up Procedure

Run the smart-roam quick-kickoff-threshold { check-snr | check-rate } command to set the mode for triggering the function of quickly disconnecting STAs, and the smart-roam quick-kickoff-threshold command to set the threshold for quickly disconnecting STAs. The AP will disconnect STAs whose SNR or access rate is lower the specified threshold.

Example

# Enable the function of quickly disconnecting STAs.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] rrm-profile name default
[Huawei-wlan-rrm-prof-default] undo smart-roam quick-kickoff-threshold disable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204626

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next