No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display snmp-agent trap feature-name all

display snmp-agent trap feature-name all

Function

The display snmp-agent trap feature-name all command displays whether the router is enabled to send alarms of specified features to the NM station.

Format

display snmp-agent trap feature-name feature-name all

Parameters

Parameter Description Value
feature-name Specifies the feature that generates alarms. -

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After the router is enabled to send alarms to the NM station, you can run the display snmp-agent trap feature-name all command to check whether the alarm function is enabled for specified features. You can use the snmp-agent trap enable feature-name command to enable the alarm function of specified features.

Example

# Display the status of the RMON alarms.
<Huawei> display snmp-agent trap feature-name rmon all
------------------------------------------------------------------------------  
Feature name: RMON                                                              
Trap number : 4                                                                 
------------------------------------------------------------------------------  
Trap name                       Default switch status   Current switch status   
risingalarm                     on                      on                      
fallingalarm                    on                      on                      
rmon_pri_risingalarm            on                      on                      
rmon_pri_fallingalarm           on                      on  
Table 28-10  Description of the display snmp-agent trap feature-name all command output

Item

Description

Feature name

Name of the feature that generates alarms.

Trap number

Number of alarms generated by this feature.

Trap name

Name of the alarm.

Default switch status

Status of the default trap switch:
  • on: The trap function is enabled.
  • off: The trap function is disabled.

Current switch status

Status of the current trap switch:
  • on: The trap function is enabled.
  • off: The trap function is disabled.

This status can be configured using the snmp-agent trap enable feature-name command.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207792

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next