No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display rm interface

display rm interface

Function

The display rm interface command displays routing management (RM) information on an interface.

Format

display rm interface [ interface-type interface-number ]

display rm interface [ ip-address ip-address ]

Parameters

Parameter Description Value
interface-type interface-number Displays RM information on the specified interface. -
ip-address ip-address Displays RM information on the interface with the specified destination address. The value is in dotted decimal notation.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can use this command to view IPv4 RM information on an interface, including information about physical and logical interfaces of the interface. This information helps locate routing problems.

Example

# Display RM information on interfaces.

<Huawei> display rm interface

Name: InLoopBack0                                                               
Physical IF Info:                                                               
 IfnetIndex: 0x1                                                                
 State: UP LOOP MULT                                                            
 Slot: 0(Logic Slot: 0)                                                         
 IntType: 26, PriLog: 1, MTU: 1500, Reference Count 16                          
 Bandwidth: 0, 0                                                                
 Baudrate: 0, 0                                                                 
 Delay: 0, Reliability: 0, Load: 0                                              
 LDP-ISIS sync capability: disabled                                             
 LDP-OSPF sync capability: disabled                                             
 InstanceID: 0, Instance Name: Public                                           
 Age: 20601sec                                                                  
Logical IF Info:                                                                
 IfnetIndex: 0x1, PhyIndex: 1 Logical Index : 1,                                
 Dest: 127.0.0.1, Mask: 255.0.0.0                                               
 State: UP LOOP PRM MULT , Reference Count 14                                   
 Age: 20601sec                                                                  
......
Table 6-111  Description of the display rm interface command output

Item

Description

Name

Name of the interface.

Physical IF Info

Physical interface information.

IfnetIndex

Network segment index of the interface.

State

Current interface status.

Hardware Address

MAC address of the interface.

Slot

Slot ID of the interface.

IntType

Type of the interface.

PriLog

Index of the primary logical interface.

MTU

Maximum transmission unit (MTU) of the interface.

Reference Count

Number of times the interface is referenced.

Bandwidth

Bandwidth of the interface.

Baudrate

Baud rate of the interface.

Delay

Link delay.

Reliability

Link reliability.

Load

Link load.

LDP-ISIS sync capability

Whether synchronization between LDP and IS-IS is enabled:
  • enabled: indicates that synchronization is enabled.
  • disabled: indicates that synchronization is disabled.

LDP-OSPF sync capability

Whether synchronization between LDP and OSPF is enabled:
  • enabled: indicates that synchronization is enabled.
  • disabled: indicates that synchronization is disabled.

InstanceID

Instance ID.

Instance Name

Instance name.

Logical IF Info

Logical interface information.

PhyIndex

Physical interface index.

Logical Index

Logical interface index.

Dest

Destination address.

Mask

Mask of the destination address.

Age

Lifetime of the displayed information.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 209140

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next