No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
stelnet server enable

stelnet server enable

Function

The stelnet server enable command enables the STelnet service on the SSH server.

The undo stelnet server enable command disables the STelnet service on the SSH server.

By default, the STelnet service is enabled on the SSH server.

Format

stelnet server enable

undo stelnet server enable

Parameters

None

Views

System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To connect a client to the SSH server through STelnet, you must enable the STelnet service on the SSH server.

Precautions

After you disable the STelnet service on the SSH server, all clients that have logged in through STelnet are disconnected.

Example

# Enable the STelnet service.

<Huawei> system-view
[Huawei] stelnet server enable
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210693

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next