No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
management-vlan (WAN view)

management-vlan (WAN view)


The management-vlan command configures a management VLAN for a cloud AP.

The undo management-vlan command restores the management VLAN of a cloud AP to VLAN 1.

By default, the management VLAN of a cloud AP is VLAN 1.


management-vlan vlan-id

undo management-vlan


Parameter Description Value
vlan-id Specifies the ID of a management VLAN. The value is an integer that ranges from 1 to 4094.


WAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After a cloud AP goes online, its management VLAN is uniformly changed by the Agile Controller-Campus. If the cloud AP fails to go online or is not managed by the Agile Controller-Campus, you can run this command to change its management VLAN. Create a VLAN before changing the management VLAN of a cloud AP.


# Configure VLAN 100 as the management VLAN of a cloud AP.

<Huawei> system-view
[Huawei] interface wan0
[Huawei-WAN] management-vlan 100
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194793

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next