No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-load-balance dynamic deauth-fail-times

sta-load-balance dynamic deauth-fail-times

Function

The sta-load-balance dynamic deauth-fail-times command sets the maximum number of attempts to migrate STAs in deauthentication mode.

The undo sta-load-balance dynamic deauth-fail-times command restores the default maximum number of attempts to migrate STAs in deauthentication mode.

By default, the maximum number of attempts to migrate STAs in deauthentication mode is 2.

Only cloud APs support this command.

Format

sta-load-balance dynamic deauth-fail-times deauth-fail-times

undo sta-load-balance dynamic deauth-fail-times

Parameters

Parameter

Description

Value

deauth-fail-times

Specifies the number of attempts to migrate STAs in deauthentication mode.

The value is an integer that ranges from 0 to 5.

The value 0 indicates that the deauthentication mode is not used to migrate STAs.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The device attempts to use the 802.11v and deauthentication modes to trigger STA migration to the target AP. Due to differences of STAs, some STAs can be successfully migrated in deauthentication mode after multiple attempts. You can run the sta-load-balance dynamic deauth-fail-times command to set the maximum number of attempts to migrate STAs in deauthentication mode. If the number of attempts exceeds the specified value, STAs cannot be migrated.

Precautions

You are advised to retain the default value. If the success rate of STA migration in deauthentication mode is low or STA services are affected, set the parameter value to 0 to disable STA migration in deauthentication mode.

This command is valid only in sta-number mode.

Example

# Set the maximum number of attempts to migrate STAs in deauthentication mode to 1 in RRM profile default.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] rrm-profile name default
[Huawei-wlan-rrm-prof-default] sta-load-balance dynamic deauth-fail-times 1
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203132

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next