No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
next-server

next-server

Function

The next-server command configures the IP address of a server for the DHCP client after the client automatically obtains the IP address.

The undo next-server command deletes a configured IP address of a server for the DHCP client after the client automatically obtains the IP address.

By default, no IP address of a server is configured for the DHCP client after the client automatically obtains the IP address.

Format

next-server ip-address

undo next-server

Parameters

Parameter

Description

Value

ip-address

Specifies a server IP address.

The value is in dotted decimal notation.

Views

IP address pool view, DHCP Option template view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The next-server command is used on DHCP servers. When assigning a client an IP address, a DHCP server can also assign the client an IP address of the server that provides network services for the client. For example, after obtaining IP addresses, clients such as IP phones need parameters such as the startup configuration file to work normally. You can run the next-server command to specify the server address used after a client obtains an IP address. The client then requests the configuration parameters from the specified server after obtaining an IP address.

If users use addresses in the interface address pool, run the dhcp server next-server command to specify the DHCP server IP address. If users use addresses in the global address pool, run the next-server command to specify the DHCP server IP address.

Precautions

  • Only one IP address of a server that provides network services can be configured in each IP address pool view or DHCP Option template view. If the system needs multiple IP addresses of servers that provide network services, configure multiple IP address pools or DHCP Option templates.
  • If you run the next-server command multiple times, only the latest configuration takes effect.

Example

# In the IP address pool view, set the IP address of a server for the DHCP client after the client automatically obtains the IP address to 10.1.2.2.
<Huawei> system-view
[Huawei] ip pool global1
[Huawei-ip-pool-global1] next-server 10.1.2.2
# In the DHCP Option template view, set the IP address of a server for the DHCP client after the client automatically obtains the IP address to 10.1.2.2.
<Huawei> system-view
[Huawei] dhcp option template template1
[Huawei-dhcp-option-template-template1] next-server 10.1.2.2
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207435

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next