No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-ipv6-service enable

sta-ipv6-service enable

Function

The sta-ipv6-service enable command enables the function of processing STA IPv6 services.

The undo sta-ipv6-service enable command disables the function of processing STA IPv6 services.

By default, the function of processing STA IPv6 services is disabled.

Format

sta-ipv6-service enable

undo sta-ipv6-service enable

Parameters

None

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

On an IPv6 network, the AP needs to forward IPv6 packets. After this function is enabled, the AP can forward received STA IPv6 packets transparently to other devices rather than discarding these packets.

Example

# Enable the function of processing STA IPv6 services.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] sta-ipv6-service enable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210029

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next