No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap-mac

ap-mac

Function

The ap-mac command adds an RU offline or displays the AP view.

By default, no RU is added offline.

Format

ap-mac ap-mac [ type-id type-id | ap-type ap-type ] [ ap-id ap-id ] [ ap-sn ap-sn ]

Parameters

Parameter

Description

Value

ap-mac

Specifies the MAC address of an RU.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

type-id type-id

Specifies the RU type ID.

The value is an integer that ranges from 0 to 255.

ap-type ap-type

Specifies the RU type.

The value is a string of 1 to 31 characters.

ap-id ap-id

Specifies the RU ID.

The value is an integer that ranges from 1 to 127.

ap-sn ap-sn

Specifies the sequence number (SN) of an RU.

The value is a string of 1 to 31 characters, and can only contain letters and digits.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After an RU is successfully added to a central AP, you can configure parameters for the RU offline. When the RU goes online, it uses the configured parameters.

Precautions

When adding an RU, you need to enter the MAC address of the RU. If the RU authentication mode is SN authentication, you also need to enter the SN of the RU.

To enter the AP view, you only need to enter the MAC address of the RU. If the entered MAC address does not exist, the system adds a new RU and displays the AP view.

The ap-mac ap-mac [ type-id type-id | ap-type ap-type ] [ ap-id ap-id ] [ ap-sn ap-sn ] and ap-id ap-id [ [ type-id type-id | ap-type ap-type ] { ap-mac ap-mac | ap-sn ap-sn | ap-mac ap-mac ap-sn ap-sn } ] commands have the same function. You can use either one according to the actual situation.

Example

# Add the RU with the MAC address 0025-9e07-8260.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ap-mac 0025-9e07-8260
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207382

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next