No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
radius-attribute check

radius-attribute check

Function

The radius-attribute check command enables the device to check the specified attributes in the received RADIUS Access-Accept packets.

The undo radius-attribute check command disables the device from checking the specified attributes in the received RADIUS Access-Accept packets.

By default, the device does not check whether a RADIUS Access-Accept packet contains the specified attributes.

Format

radius-attribute check attribute-name

undo radius-attribute check [ attribute-name ]

Parameters

Parameter

Description

Value

attribute-name

Specifies the name of the RADIUS attribute. If this parameter is specified, the RADIUS Access-Accept packets are checked based on attribute names.

The value is a string of 1 to 64 characters. After the name is entered, the system automatically associates the RADIUS attribute with the name.

Views

RADIUS server template view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

After the radius-attribute check command is executed, the device checks whether the received RADIUS Access-Accept packets contain the specified attributes. If yes, the device considers that authentication was successful; if not, the device considers that authentication failed and discards the packet. For example, after the radius-attribute check filter-id command is executed, the device checks the filter-id attribute in the received RADIUS Access-Accept packets. If a RADIUS packet does not contain this attribute, authentication fails.

Precautions

  • When you use the undo radius-attribute check command with parameters, the device checks the specified attributes in the RADIUS Access-Accept packets. When you use the undo radius-attribute check command without any parameter, the device does not check RADIUS Access-Accept packets.
  • The display radius-attribute can display RADIUS attribute names.

Example

# Check whether the RADIUS Access-Accept packets contain the framed-protocol attribute.

<Huawei> system-view
[Huawei] radius-server template test1
[Huawei-radius-test1] radius-attribute check framed-protocol
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207933

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next