No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
traffic-optimize broadcast-suppression

traffic-optimize broadcast-suppression

Function

The traffic-optimize broadcast-suppression command sets the maximum traffic volume of broadcast packets that can pass through a traffic profile.

The undo traffic-optimize broadcast-suppression command cancels the limit on the maximum traffic volume of broadcast packets that can pass through a traffic profile.

By default, broadcast packets are not suppressed on a traffic profile.

Format

traffic-optimize broadcast-suppression packets packets-rate

undo traffic-optimize broadcast-suppression

Parameters

Parameter

Description

Value

packets packets-rate

Specifies the number of packets transmitted per second.

The value is an integer that ranges from 0 to 14881000, in pps.

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

When a large number of broadcast packets are transmitted on a network, a lot of network resources are occupied, and services on the network are affected.

To prevent broadcast storms, you can run the traffic-optimize broadcast-suppression command to configure the maximum traffic volume of broadcast packets that can pass through a traffic profile. When the traffic volume of broadcast packets reaches the maximum in a traffic profile, the system discards excess broadcast packets to control the traffic volume in a proper range.

Example

# Set the maximum traffic volume of broadcast packets that can pass through 21600 pps in traffic profile p1.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] traffic-profile name p1
[Huawei-wlan-traffic-prof-p1] traffic-optimize broadcast-suppression packets 21600
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 196710

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next