No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
calibrate enable { auto | manual | schedule time }

calibrate enable { auto | manual | schedule time }

Function

The calibrate enable { auto | manual | schedule time } command configures the radio calibration mode.

The undo calibrate enable command disables calibration.

By default, the radio calibration mode is auto, the radio calibration interval is 1440 minutes, and the start time for radio calibration is 03:00:00.

Format

calibrate enable { auto [ interval interval-value [ start-time start-time ] ] | manual | schedule time time-value }

undo calibrate enable

Parameters

Parameter Description Value
auto

Sets the radio calibration mode to auto.

-

interval interval-value

Specifies the radio calibration interval in auto mode.

The value is an integer that ranges from 30 to 1440, in minutes. If interval is not specified, the radio calibration interval in auto mode is 1440 minutes.

start-time start-time

Specifies the start time for radio calibration in automatic mode.

The value is in the format of hh:mm:ss.
  • hh: indicates the hour. The value is an integer that ranges from 0 to 23.
  • mm: indicates the minute. The value is an integer that ranges from 0 to 59.
  • ss: indicates the second. The value is an integer that ranges from 0 to 59.
manual

Sets the radio calibration mode to manual.

-

schedule

Sets the radio calibration mode to schedule.

-

time time-value

Specifies the time for triggering the scheduled radio calibration.

The value is in the format of hh:mm:ss.
  • hh: indicates the hour. The value is an integer that ranges from 0 to 23.
  • mm: indicates the minute. The value is an integer that ranges from 0 to 59.
  • ss: indicates the second. The value is an integer that ranges from 0 to 59.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

There are three radio calibration modes:
  • Auto mode: The device periodically implements radio calibration at certain intervals (the interval is specified by interval and the default interval is 1440 minutes).
  • Manual mode: Radio calibration is not automatically implemented by the device but manually triggered through the calibrate manual startup command.
  • Schedule mode: The device triggers radio calibration at the time specified by the parameter time.
The three modes cannot be configured simultaneously. You can choose any of the modes as required.

In any mode, you can run the calibrate manual startup command to trigger the calibration. In manual mode, the device implements radio calibration only after the calibrate manual startup command is executed.

Example

# Set the radio calibration mode to manual.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] calibrate enable manual

# Set the radio calibration mode to schedule and set the time for scheduled radio calibration to 20:30:00.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] calibrate enable schedule time 20:30:00
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205381

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next