No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display sac protocol-statistic

display sac protocol-statistic

Function

The display sac protocol-statistic command displays statistics on packets of different SAC application protocols

Format

display sac protocol-statistic { period | total } { inbound | outbound | all } { protocol protocol-name | top-n number } { ap-id ap-id radio-id radio-id ssid ssid | ap-name ap-name radio-id radio-id ssid ssid | user user-mac }

Parameters

Parameter

Description

Value

period

Displays packet statistics collected in a period, that is, 60 seconds.

-

total

Displays all the collected data.

-

inbound

Displays statistics on incoming packets.

-

outbound

Displays statistics on outgoing packets.

-

all

Displays statistics on packets of all SAC application protocols.

-

protocol protocol-name

Displays statistics on packets of a specified SAC application protocol.

The value is a string of case-insensitive characters without spaces. The protocol must be in the signature database.

top-n number

Displays statistics on packets with the largest number of bytes of the first Nth SAC application protocols.

The value is an integer that ranges from 1 to 10.

ap-id ap-id

Displays statistics on packets with a specified AP ID.

The AP ID must exist.

user user-mac

Displays statistics on packets with a specified MAC address.

The MAC address must exist.

ap-name ap-name

Displays packet statistics on a specified AP.

The AP name must exist.

radio-id radio-id

Displays packet statistics on a specified radio.

The radio ID must exist.

ssid ssid

Displays statistics on packets with a specified SSID.

The SSID must exist.

Views

All view

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

When the SAC statistics collection function is enabled, you can run the display sac protocol-statistic command to check statistics on packets of different SAC application protocols.

Prerequisites

The SAC statistics collection function has been enabled using the user-protocol-statistic enable and vap-protocol-statistic enable commands.

Precautions

If there is no packet of an SAC application protocol, the statistics on packets of the protocol are empty.

Example

# Display statistics on incoming email packets with MAC address 1000-0000-0001 collected in a period.

<Huawei> display sac protocol-statistic period inbound protocol email user 1000-0000-0001
Protocol       Direction     Packets        Bytes
--------------------------------------------------------------------------
email          Inbound       1000           100000
--------------------------------------------------------------------------
Table 27-58  Description of the display sac protocol-statistic command output

Item

Description

Protocol

SAC application protocol.

Direction

  • Inbound: Statistics on incoming packets.
  • Outbound: Statistics on outgoing packets.

Packets

Number of forwarded packets after SAC is enabled.

Bytes

Number of forwarded bytes after SAC is enabled.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204275

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next