No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dot1x-access-profile (authentication profile view)

dot1x-access-profile (authentication profile view)


The dot1x-access-profile command binds an authentication profile to an 802.1X access profile.

The undo dot1x-access-profile command unbinds an authentication profile from an 802.1X access profile.

By default, an authentication profile is not bound to an 802.1X access profile.


dot1x-access-profile access-profile-name

undo dot1x-access-profile






Specifies the name of an 802.1X access profile.

The value must be the name of an existing 802.1X access profile.


Authentication profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The authentication type used by an authentication profile is determined by the access profile bound to the authentication profile. After being bound to an 802.1X access profile, the authentication profile is enabled with 802.1X authentication. After the authentication profile is applied to the VAP profile, 802.1X authentication can be performed on online users.


An 802.1X access profile has been created using the dot1x-access-profile (system view) command.

Follow-up Procedure

Run the authentication-profile (VAP profile view) command to apply the authentication profile to the VAP profile.


An authentication profile can be bound to only one 802.1X access profile.


# Bind the authentication profile dot1x_authen_profile1 to the 802.1X access profile dot1x_access_profile1.

<Huawei> system-view
[Huawei] dot1x-access-profile name dot1x_access_profile1
[Huawei-dot1x-access-profile-dot1x_access_profile1] quit
[Huawei] authentication-profile name dot1x_authen_profile1
[Huawei-authentication-profile-dot1x_authen_profile1] dot1x-access-profile dot1x_access_profile1
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 206674

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next