No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display snmp-agent target-host

display snmp-agent target-host

Function

The display snmp-agent target-host command displays the list of destination hosts that receive trap messages.

Format

display snmp-agent target-host

Parameters

None

Views

All views

Default Level

3: Management level

Usage Guidelines

Usage Scenario
You can run this command to check information about all destination hosts that can receive trap messages. The command output consists of the following two parts:
  • List of the destination hosts that receive traps.
  • Parameter list of the destination hosts and hosts that are not bound to the parameters.
Precautions

Host parameters must have been configured for the destination host. Otherwise, the destination host cannot receive traps, and parameters are not displayed.

Example

# Display the configurations of all destination hosts in the system.

<Huawei> display snmp-agent target-host
   Traphost list:
   Target host name: nms2
   Traphost address: 10.10.1.2
   Traphost portnumber: 162
   Target host parameter: trapnms2

   Total number is 1

   Parameter list trap target host:
   Parameter name of the target host: trapnms2
   Message mode of the target host: SNMPV3
   Trap version of the target host: v3
   Security name of the target host: testuser
   Security level of the target host: privacy

   Total number is 1
Table 28-8  Description of the display snmp-agent target-host command output

Item

Description

Traphost list

List of the destination hosts that receive trap messages.

Target host name

Name of a destination host that receives trap messages.

Traphost address

IP address of a destination host that receives trap messages.

Traphost domain

Domain name of a destination host that receives trap messages.

Traphost portnumber

Number of the port on a destination host for receiving trap messages.

Target host parameter

Parameter of destination hosts that receive trap messages.

Parameter list trap target host

Parameter list of destination hosts that receive traps.

Parameter name of the target host

Parameter name of destination hosts that receive trap messages.

Message mode of the target host

Protocol used by destination hosts that receive trap messages.

Trap version of the target host

Version of the protocol for transmitting trap messages.

Security name of the target host

Security name of destination hosts that receive trap messages.

Security level of the target host

Authentication mode of trap messages.

Total number

Total number of views whose information is queried.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203261

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next