No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ac-list (AP provisioning view)

ac-list (AP provisioning view)


The ac-list command configures a Central AP IPv4 address list for RUs.

The undo ac-list command restores the Central AP IPv4 address list to the default value.

By default, no Central AP IPv4 address list is configured.


ac-list ipv4-address &<1-4>

undo ac-list


Parameter Description Value
ipv4-address Specifies the IPv4 address of a Central AP.

The value is in dotted decimal notation.


AP provisioning view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run this command to configure a Central AP IPv4 address list for RUs. After this list is configured, the RUs can unicast a Discovery Request packet to discover a Central AP when they go online using IPv4 addresses.

Follow-up Procedure

Run the commit command to deliver configuration to RUs and restart the RUs to make the configuration take effect.


# Set the Central AP's IPv4 address to in AP provisioning view.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] provision-ap
[Huawei-wlan-provision-ap] ac-list
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 270587

Downloads: 147

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next