No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dynamic-edca enable

dynamic-edca enable


The dynamic-edca enable command enables dynamic EDCA parameter adjustment.

The undo dynamic-edca enable command disables dynamic EDCA parameter adjustment.

By default, dynamic EDCA parameter adjustment is disabled.


dynamic-edca enable

undo dynamic-edca enable




RRM profile view

Default Level

2: Configuration level

Usage Guidelines

A WLAN has only three non-overlapping channels on the 2.4 GHz frequency band. When APs are deployed densely, multiple APs have to work in the same channel, resulting in co-channel interference. This interference degrades network performance.

The dynamic EDCA parameter adjustment function allows APs to adjust EDCA parameters flexibly to reduce the possibility of collision, improve the throughput, and enhance user experience.


# Enable dynamic EDCA parameter adjustment.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] rrm-profile name huawei
[Huawei-wlan-rrm-prof-huawei] dynamic-edca enable
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 208014

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next