No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
target (user-defined IPS signature view)

target (user-defined IPS signature view)


The target command configures the target of a user-defined signature.

The undo target command deletes the target of a user-defined signature.


target { both | client | server }

undo target


Parameter Description Value

Detects attack packets to both clients and servers.



Detects attack packets to clients.



Detects attack packets to servers.



User-defined IPS signature view

Default Level

2: Configuration level

Usage Guidelines

A user-defined signature detects attack packets to both clients and servers by default.

For example, For TCP/UDP packets, the initiator is the client, whereas the destination of the TCP/UDP packets is the server.


# Configure user-defined signature 1 and set the detection target to server.

<Huawei> system-view
[Huawei] ips signature-id 1
[Huawei-ips-signature-1] target server
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205648

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next