No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display dot1x-access-profile configuration

display dot1x-access-profile configuration


The display dot1x-access-profile configuration command displays the configuration of an 802.1X access profile.


display dot1x-access-profile configuration [ name access-profile-name ]





name access-profile-name

Displays the configuration of an 802.1X access profile with a specified name.

If name access-profile-name is not specified, the device displays all the 802.1X access profiles configured on the device. If name access-profile-name is specified, the device displays the configuration of a specified 802.1X access profile.

The value must be the name of an existing 802.1X access profile.


All views

Default Level

1: Monitoring level

Usage Guidelines

After configuring an 802.1X access profile, you can run this command to check whether the configuration is correct.


# Display all the 802.1X access profiles configured on the device.

<Huawei> display dot1x-access-profile configuration
 ID             Dot1x-Access-Profile Name                                                                                           
 0              dot1x_access_profile                                                                                                
 1              d1                                                                                                                  
 2              d2                                                                                                                   
 3              d3                                                                                                                   
 4              d4                                                                                                        
 Total: 5 printed: 5. 
Table 26-45  Description of the display dot1x-access-profile configuration command output




802.1X access profile ID.

Dot1x-Access-Profile Name

802.1X access profile name.

# Display the configuration of the 802.1X access profile d1.

<Huawei> display dot1x-access-profile configuration name d1
  Profile Name                 : d1                                                                                                 
  Authentication method        : CHAP                                                                                               
  Re-authen                    : Enable                                                                                             
  Client-no-response authorize : vlan: 10                                                                                           
  Max retry value              : 2                                                                                                  
  Reauthen Period              : 3600s                                                                                              
  Client Timeout               : 5s                                                                                                 
  Bound authentication profile : - 
Table 26-46  Description of the display dot1x-access-profile configuration name command output



Profile Name

802.1X access profile name.

Authentication method

Authentication mode of 802.1X users:
  • CHAP
  • PAP
  • EAP

To configure the authentication mode, run the dot1x authentication-method command.


Whether re-authentication for online 802.1X users is enabled:
  • Enable
  • Disable

To configure the re-authentication function, run the dot1x reauthenticate command.

Client-no-response authorize

Network access rights granted to users when the 802.1X client does not respond.

To configure the network access rights, run the authentication event client-no-response action authorize command.

Max retry value

Maximum number of attempts to send authentication requests to 802.1X users.

To configure the maximum value, run the dot1x retry command.

Reauthen Period

Re-authentication interval for online 802.1X users.

To configure the re-authentication interval, run the dot1x timer command.

Client Timeout

Authentication timeout period for 802.1X clients.

To configure the authentication timeout period, run the dot1x timer command.

Bound authentication profile

Authentication profile to which the 802.1X access profile is bound.

To configure the authentication profile, run the dot1x-access-profile (authentication profile view) command.

Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204035

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next