No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
vrrp version-3 send-packet-mode

vrrp version-3 send-packet-mode

Function

The vrrp version-3 send-packet-mode command configures a mode in which VRRPv3 Advertisement packets are sent.

The undo vrrp version-3 send-packet-mode command restores the default mode in which VRRPv3 Advertisement packets are sent.

By default, the mode is v3-only.

Format

vrrp version-3 send-packet-mode { v2-only | v3-only | v2v3-both }

undo vrrp version-3 send-packet-mode

Parameters

Parameter Description Value
v2-only Indicates that the device sends only VRRPv2 Advertisement packets. -
v3-only Indicates that the device sends only VRRPv3 Advertisement packets. -
v2v3-both Indicates that the device sends VRRPv2 and VRRPv3 Advertisement packets. -

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If devices in a VRRP group use different VRRP version numbers, the VRRP group may fail to negotiate the status. This is because a VRRPv2-enabled device can only receive VRRPv2 Advertisement packets and discards the received VRRPv3 Advertisement packets. You can set the mode in which VRRP Advertisement packets are sent so that the VRRP group can negotiate the status.

Precautions

  • Only VRRPv3 supports this command.

  • If the vrrp version-3 send-packet-mode command is used in the system view and interface view simultaneously, the configuration in the interface view takes effect.

If many VRRP groups are configured, v2v3-both is not recommended.

Example

# Set the mode in which VRRP Advertisement packets are sent to v2-only.

<Huawei> system-view
[Huawei] vrrp version-3 send-packet-mode v2-only
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205412

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next