No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dialer retry limit

dialer retry limit

Function

The dialer retry limit command sets the quiet duration and retransmission times in the quiet duration.

The undo dialer retry limit command restores the default settings.

By default, the quiet duration and retransmission times in the quiet duration are not set on a router.

Format

dialer retry limit counts quiet-period period

undo dialer retry limit

Parameters

Parameter Description Value
counts Specifies retransmission times in the quiet duration. The value is an integer that ranges from 1 to 65535.
quiet-period period Specifies the quiet duration. The value is an integer that ranges from 1 to 65535, in seconds.

Views

Dialer interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a device of other vendors functions as the PPPoE server, it limits the number of connection attempts of a client in a specified period (quiet duration). When the number of connection attempts exceeds the threshold, the device no longer receives connection requests from the client.

When a router functions as a PPPoE client, it continuously sends connection requests to the PPPoE server until a connection is established. When the number of connection attempts in the quiet duration exceeds the maximum value allowed on the PPPoE server, the PPPoE server no longer receives connection requests from the client until the quiet duration times out. However, the client still sends connection requests to the PPPoE server in the quiet duration, wasting resources.

To address this problem, set the quiet duration and retransmission times in the quiet duration. When the number of retransmission times in the quiet duration exceeds the threshold, the client stops sending connection requests to the server until the quiet duration times out.

Precautions

If you run the dialer retry limit command multiple times in the same view, only the latest configuration takes effect.

Example

# Set the quiet duration to 10s and retransmission times in the quiet duration to 20.

<Huawei> system-view
[Huawei] interface dialer 1
[Huawei-Dialer1] dialer retry limit 20 quiet-period 10
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210293

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next