No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
radius-server source ip-address

radius-server source ip-address

Function

The radius-server source ip-address command configures the source IP address for communication between the device and RADIUS server.

The undo radius-server source ip-address command deletes the source IP address for communication between the device and RADIUS server.

By default, no source IP address is configured for communication between the device and RADIUS server.

Format

radius-server source ip-address ipv4-address

undo radius-server source ip-address ipv4-address

Parameters

Parameter Description Value
ipv4-address Specifies the source IPv4 address for communication between the device and RADIUS server. The value is in dotted decimal notation.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

The radius-server source ip-address command configures the source IP address for communication between the device and RADIUS server.

If no source IP address is configured in an RADIUS server template, the source IP address configured in the system view is used.

The radius-server source ip-address command running in the system view takes effect on all RADIUS server templates. If the source IP address is configured in both the RADIUS server template view and system view, the configuration in the RADIUS server template view has a higher priority.

Example

# Set the source IP address for communication between the device and RADIUS server to 192.168.1.1.

<Huawei> system-view
[Huawei] radius-server source ip-address 192.168.1.1
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194800

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next