No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
http server enable

http server enable


The http server enable command enables the HTTP server.

The undo http server enable command disables the HTTP server.

By default, the HTTP server is enabled.


http server enable

undo http server enable




System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

After running the http server enable command to enable the HTTP server, you can use the browser to access the web NMS to manage devices.

If the web page to load does not exist, the HTTP service cannot be enabled.


After you run the http server enable command, HTTP and HTTPS services are both enabled. If you log in to the web platform using HTTP, the user name and password are encrypted and transmitted through the HTTPS protocol. After user authentication is completed, data is still transmitted using the HTTP protocol.

After you run the undo http server enable command, you disable only the HTTP server function but not the HTTPS server function.


# Enable the HTTP server.

<Huawei> system-view
[Huawei] http server enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210035

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next