No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
web-auth-server listening-port

web-auth-server listening-port


The web-auth-server listening-port command sets the number of the port through which a device listens on Portal protocol packets.

The undo web-auth-server listening-port command restores the default listening port.

By default, the device uses port 2000 to listen on Portal protocol packets.


web-auth-server listening-port port-number

undo web-auth-server listening-port


Parameter Description Value
port-number Specifies the number of the listening port. The value is an integer that ranges from 1024 to 55535.


System view

Default Level

2: Configuration level

Usage Guidelines

When the device exchanges user authentication information with the Portal server using the Portal protocol, you must configure the listening port on the device to receive Portal packets.

You can run the web-auth-server listening-port command to set the number of the port through which the device listens on Portal packets. The port number must be the same as the destination port number in Portal packets sent by the Portal server and must be unique.

If a specified port is occupied by another service or is a reserved port, the configuration fails. Ensure that the specified port is available when running this command.


# Set the number of the port through which a device listens on Portal protocol packets to 3000.

<Huawei> system-view
[Huawei] web-auth-server listening-port 3000
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205677

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next