No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
location-profile

location-profile

Function

The location-profile command binds a location profile to an AP radio interface.

The undo location-profile command unbinds a location profile from an AP radio interface.

By default, no location profile is bound to a radio interface.

Format

location-profile profile-name

undo location-profile

Parameters

Parameter

Description

Value

profile-name

Specifies the name of a location profile.

The location profile name must already exist.

Views

radio interface view

Default Level

2: Configuration level

Usage Guidelines

You can also run this command to bind a location profile to a radio interface. After the binding, the parameters of the location profile will be applied to the radio interface.

Example

# Bind the location profile default to the 2.4G radio interface.

<Huawei> system-view
[Huawei] interface Wlan-Radio 0/0/0
[Huawei-Wlan-Radio0/0/0] location-profile default
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 200911

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next