No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
portal web-authen-server

portal web-authen-server


The portal web-authen-server command enables the Portal interconnection function of the HTTP or HTTPS protocol.

The undo portal web-authen-server command disables the Portal interconnection function of the HTTP or HTTPS protocol.

By default, the Portal interconnection function of the HTTP or HTTPS protocol is disabled.


portal web-authen-server { http | https ssl-policy policy-name } [ port port-number ]

undo portal web-authen-server [ port ]






Sets the HTTP protocol for Portal authentication.


The HTTP protocol poses security risks. The HTTPS protocol is recommended.



Sets the HTTPS protocol for Portal authentication.


ssl-policy policy-name

Specifies the name of an SSL policy.

The value must be the name of an existing SSL policy.

port port-number

Specifies a port number.

The value is an integer that ranges from 1025 to 55535.

The default HTTP port number is 8000 and the default HTTPS port number is 8443.


System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If the device is connected to the Portal server that only supports the HTTP or HTTPS protocol, you need to run the portal web-authen-server command on the device to enable the Portal interconnection function of the HTTP or HTTPS protocol.

Follow-up Procedure

Run the protocol command to set the protocol used in Portal authentication to HTTP or HTTPS.


Modifying the port parameter causes the pre-connected user to go offline.


# Enable the Portal interconnection function of the HTTPS protocol.

<Huawei> system-view
[Huawei] ssl policy huawei type server
[Huawei-ssl-policy-huawei] quit
[Huawei] http secure-server ssl-policy huawei
[Huawei] portal web-authen-server https ssl-policy huawei port 8443
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 247432

Downloads: 140

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next