No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
arp gratuitous-arp send interval

arp gratuitous-arp send interval

Function

The arp gratuitous-arp send interval command sets the interval for sending gratuitous ARP packets.

The undo arp gratuitous-arp send interval command restores the default interval for sending gratuitous ARP packets.

By default, the interval for sending gratuitous ARP packets is 90 seconds.

Format

arp gratuitous-arp send interval interval-time

undo arp gratuitous-arp send interval

Parameters

Parameter

Description

Value

interval-time

Specifies the interval for sending gratuitous ARP packets.

The value is an integer that ranges from 1 to 86400, in seconds.

Views

System view, VLANIF interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

By default, the device sends a gratuitous ARP packet every 90 seconds after gratuitous ARP sending is enabled. You can set the interval for sending gratuitous ARP packets using the arp gratuitous-arp send interval command.

If you set the interval in the system view, the configuration takes effect on all VLANIF interfaces. If you set the interval in both the system view and VLANIF interface view, the configuration on the VLANIF interface takes precedence over the global configuration.

Prerequisites

Gratuitous ARP packet sending has been enabled using the arp gratuitous-arp send enable command.

Example

# Set the interval for sending gratuitous ARP packets to 100 seconds on VLANIF 10.

<Huawei> system-view
[Huawei] interface vlanif 10
[Huawei-Vlanif10] arp gratuitous-arp send enable
[Huawei-Vlanif10] arp gratuitous-arp send interval 100
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194706

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next