No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The min-rssi-threshold command sets the minimum RSSI threshold of a Mesh link in a Mesh handover profile.

The undo min-rssi-threshold command restores the default minimum RSSI threshold of a Mesh link in a Mesh handover profile.

By default, the minimum RSSI threshold of a Mesh link is -60 dBm in a Mesh handover profile.


min-rssi-threshold value

undo min-rssi-threshold






Specifies the minimum RSSI threshold of a Mesh link.

The value is an integer that ranges from -90 to -20, in dBm. The default value is -60.


Mesh handover profile view

Default Level

2: Configuration level

Usage Guidelines

During a vehicle-ground fast link handover, the vehicle-mounted AP selects the candidate link of the best quality as the active link from the candidate area (the RSSI range of a candidate area is from the minimum RSSI threshold to the maximum RSSI threshold of the Mesh link). An emergency handover is triggered when the RSSI of the current active link is out of the RSSI range of the candidate area (falls below the minimum RSSI threshold of a Mesh link or exceeds the maximum RSSI threshold of a Mesh link).

In actual scenarios, set proper minimum and maximum RSSIs of a Mesh link according to network deployment. Improper values result in frequent emergency handovers or untimely handovers, degrading vehicle-ground fast link handover performance.


# Set the minimum RSSI threshold of a Mesh link to -50 dBm in the Mesh handover profile huawei.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] mesh-handover-profile name huawei
[Huawei-wlan-mesh-handover-huawei] min-rssi-threshold -50
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207864

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next