No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lock (IP address pool view)

lock (IP address pool view)

Function

The lock command locks an IP address pool.

The undo lock restores the default configuration.

By default, no IP address pool is locked.

Format

lock

undo lock

Parameters

None

Views

IP address pool view

Default Level

2: Configuration level

Usage Guidelines

After the lock command is run, the specified IP address pool is locked and IP addresses in this address pool cannot be assigned to clients. When a DHCP server needs to be redeployed, you need to migrate address pools on the DHCP server to another DHCP server on the live network. To retain the addresses that have been assigned to clients from a global address pool, run the lock command to lock the global address pool. When new users get online after the address pool migration, they apply for IP addresses from a new address pool.

Example

# Lock the IP address pool global1.

<Huawei> system-view
[Huawei] ip pool global1
[Huawei-ip-pool-global1] lock
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 206874

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next