No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
speed

speed

Function

The speed command sets the rate for an Ethernet interface in non-auto negotiation mode.

By default, an Ethernet interface works at its highest rate when it works in non-auto negotiation mode.

Format

speed { 10 | 100 | 1000 | 2500 | 5000 } *

undo speed

Parameters

Parameter

Description

Value

10

Indicates that the interface works at 10 Mbit/s.

-

100

Indicates that the interface works at 100 Mbit/s.

-

1000

Indicates that the interface works at 1000 Mbit/s.

NOTE:
FE interfaces do not support this parameter.

-

2500

Indicates that the interface works at 2500 Mbit/s.

NOTE:

Only MultiGE interfaces support this parameter.

-

5000

Indicates that the interface works at 5000 Mbit/s.

NOTE:

Only MultiGE interfaces support this parameter.

-

Views

GE interface view, MultiGE interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In non-auto negotiation mode, if interfaces on two connected devices work at different rates, use the speed command to change the rates of the interfaces to be the same so that the two devices can communicate.

Precautions
  • If the remote interface does not support the auto negotiation mode, run the undo negotiation auto command on the local interface to configure the interface to work in non-auto negotiation mode. You can then change the rate of the local interface to be the same as the rate of the remote interface to ensure proper communication.

Example

# Configure GE0/0/1 to work at 100 Mbit/s in non-auto negotiation mode.
<Huawei> system-view
[Huawei] interface gigabitethernet 0/0/1
[Huawei-GigabitEthernet0/0/1] undo negotiation auto
[Huawei-GigabitEthernet0/0/1] speed 100
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 206041

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next