No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lldp management-address

lldp management-address


The lldp management-address command configures the LLDP management IP address.

The undo lldp management-address command restores the default setting.

By default, the system automatically obtains the management IP address.


lldp management-address ip-address

undo lldp management-address






Specifies the management IP address.

The value is in dotted decimal notation.


System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The management IP address is carried in the management address TLV field of the LLDP packet. It is used by the NMS to identify and manage devices. A management address identifies a device, facilitating the layout of the network topology and network management. To allocate a management address to a neighbor, run the lldp management-address command.


The LLDP function has been enabled globally.

The management IP address to be allocated must be a valid unicast IP address existing on the device.

Configuration Impact

After the configuration, the management IP address is added to the management address TLV field of the LLDP packet. The NMS then identifies the device according to the management IP address.


If the configured management IP address is invalid or no management IP address is configured, the system sets an IP address in the address list as the management IP address. The system selects the IP address in the following sequence: loopback interface address and VLANIF interface address. Among the IP addresses of the same type, the system selects the smallest one. If the system does not find a management IP address, the bridge MAC address is used as the management IP address.


# Set the LLDP management IP address to

<Huawei> system-view
[Huawei] lldp management-address
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194891

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next