No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
clear alarm active

clear alarm active


The clear alarm active command clears active alarms.


clear alarm active { all | sequence-number sequence-number }


Parameter Description Value
all Clears all active alarms. -
sequence-number sequence-number Specifies the sequence number of an active alarm.

The value is an integer ranging from 1 to 2147483647.


Alarm view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Before collecting statistics on alarms generated on the device again, run the clear alarm active to clear active alarms.


After the clear alarm active command is used, all active alarms on the device are deleted and cannot be restored.


# Clear all active alarms on the device.

<Huawei> system-view
[Huawei] alarm
[Huawei-alarm] clear alarm active all
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 256639

Downloads: 144

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next