No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe enable

poe enable


The poe enable command enables the PoE function on an interface.

The undo poe enable command disables the PoE function on an interface.

By default, the PoE function is enabled on an interface.

Only the AP8082DN, AP8182DN, AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP2050DN-E, AP2051DN-E, AD9431DN-24X, AD9430DN-24, and AD9430DN-12 support this command.


poe enable

undo poe enable




GE interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenarios

Before providing power for the PD connected to the interface, ensure the PoE function on the interface is enabled. IF the PoE function is not enabled, run the poe enable command to enable the PoE function on the interface.

In automatic mode, the power-on and power-off of interfaces are determined by the PoE power and interface power priority. When the PoE power is sufficient, the device does not power off one interface. To stop providing power for one PD, run the undo poe enable command.


The device only supports PoE power supply on downlink interfaces and does not support PoE power supply on uplink interfaces.


# Disable the PoE function on GigabitEthernet0/0/1.
<Huawei> system-view
[Huawei] interface gigabitethernet 0/0/1
[Huawei-GigabitEthernet0/0/1] undo poe enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207674

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next