No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dai enable (AP wired port profile view)

dai enable (AP wired port profile view)


The dai enable command enables dynamic ARP inspection (DAI) on an RU's wired interface.

The undo dai enable command disables DAI on an RU's wired interface.

By default, DAI is disabled on an RU's wired interface.


dai enable

undo dai enable




AP wired port profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can enable DAI using this command to prevent Man in The Middle (MITM) attacks and theft on authorized user information. When a device receives an ARP packet, it compares the source IP address, source MAC address, interface number, and VLAN ID of the ARP packet with DHCP snooping binding entries. If the ARP packet matches a binding entry, the device allows the packet to pass through. If the ARP packet does not match any binding entry, the device discards the packet.


Terminal address learning has been enabled on the RU's wired interface using the learn-client-address enable command.

Follow-up Procedure

Bind the AP wired port profile to an AP group or AP.


This command takes effect only on ARP packets transmitted on an RU's wired interface.

The AP wired interfaces added to an Eth-trunk interface do not support this function.


# Enable DAI on an RU's wired interface.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] wired-port-profile name wire1
[Huawei-wlan-wired-port-prof-wire1] dai enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211289

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next