No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
info-center logbuffer size

info-center logbuffer size


The info-center logbuffer size command sets the maximum number of logs in the log buffer.

The undo info-center logbuffer size command restores the default maximum number of logs in the log buffer.

By default, a log buffer can store a maximum of 512 logs.


info-center logbuffer size logbuffer-size

undo info-center logbuffer size


Parameter Description Value
logbuffer-size Specifies the maximum number of logs in the log buffer. The value is an integer that ranges from 0 to 1024. If logbuffer-size is 0, logs are not displayed.


System view

Default Level

2: Configuration level

Usage Guidelines


When you run the info-center logbuffer size command multiple times, only the latest configuration takes effect.


# Set the maximum number of logs in the log buffer to 50.

<Huawei> system-view
[Huawei] info-center logbuffer size 50
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 208007

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next