No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display radius-server authorization configuration

display radius-server authorization configuration

Function

The display radius-server authorization configuration command displays the configuration of RADIUS authorization servers.

Format

display radius-server authorization configuration

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After running the radius-server authorization command to configure an authorization server, run the display radius-server authorization configuration command to check whether the authorization server configuration is correct.

Example

# Display the configuration of RADIUS authorization servers.

<Huawei> display radius-server authorization configuration
 ------------------------------------------------------------------------------
 Attribute decode same as template    :  N
 Attribute encode same as template    :  Y
 User information match type          :  all
 Calling-station-id decode MAC-format :  xx-xx-xx-xx-xx-xx
 ------------------------------------------------------------------------------
 ------------------------------------------------------------------------------
 IP-Address      Shared-key               Group                         Protect
 ------------------------------------------------------------------------------
 10.10.1.114     ****************         -                                  Y
 ------------------------------------------------------------------------------
 1 RADIUS authorization server(s) in total
Table 26-27  Description of the display radius-server authorization configuration command output

Item

Description

Attribute decode same as template

Whether the device parses attributes in the RADIUS dynamic authorization packet based on the configurations in the RADIUS server template.

To configure this field, run the radius-server authorization attribute-decode-sameastemplate command.

Attribute encode same as template

Whether the device encapsulates attributes in the CoA or DM Response packet based on the configurations in the RADIUS server template.

To configure this field, run the radius-server authorization attribute-encode-sameastemplate command.

User information match type

Method used by a device to perform a match check between the RADIUS attribute in the received CoA or DM Request packet and user information on the device. The values are as follows:
  • all: The device performs a match check between all attributes in the received CoA or DM Request packet and user information on the device.
  • any: The device performs a match check between an attribute in the received CoA or DM Request packet and user information on the device.

To configure this field, run the radius-server authorization match-type command.

Calling-station-id decode MAC-format

Format of the MAC address that can be parsed by the device and is configured in the system view in the Calling-Station-Id field of the CoA or DM Response packet.

To configure this field, run the radius-server authorization calling-station-id decode-mac-format command.

IP-Address

IP address of a RADIUS authorization server.

To configure this field, run the radius-server authorization command.

Shared-key

Shared key of the RADIUS authorization server.

To configure this field, run the radius-server authorization command.

Group

RADIUS server group matching the RADIUS authorization server.

To configure this field, run the radius-server authorization command.

Protect

Whether the security hardening function is enabled.

To configure this field, run the radius-server authorization command.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204713

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next