No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The regulatory-domain-profile command binds a regulatory domain profile to an AP or AP group.

The undo regulatory-domain-profile command unbinds a regulatory domain profile from an AP or AP group.

By default, the regulatory domain profile default is bound to an AP group, but no regulatory domain profile is bound to an AP. In the default regulatory domain profile, the country code is China, 2.4G calibration channels include channels 1, 6, and 11, 5G calibration channels include channels 149, 153, 157, 161, and 165, the 5G calibration bandwidth is 20 MHz.


regulatory-domain-profile profile-name

undo regulatory-domain-profile






Specifies the name of a regulatory domain profile.

The regulatory domain profile must exist.


AP group view, AP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After you create a regulatory domain profile using the regulatory-domain-profile (WLAN view) command, bind it to an AP or AP group so that the regulatory domain profile can take effect.


After a regulatory domain profile is bound to an AP or AP group, parameter settings in the regulatory domain profile apply to all APs using the profile.


# Create the regulatory domain profile domain1 and bind it to AP group group1.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] regulatory-domain-profile name domain1
[Huawei-wlan-regulatory-domain-prof-domain1] quit
[Huawei-wlan-view] ap-group name group1
[Huawei-wlan-ap-group-group1] regulatory-domain-profile domain1
Warning: Modifying the country code will clear channel, power and antenna gain configurations of the radio and reset the AP. Continu
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 195041

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next