No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap neighbor (Cloud AP)

display ap neighbor (Cloud AP)


The display ap neighbor command displays information about neighbors of an AP, including authorized and unauthorized neighbors.


display ap neighbor { dev-id device-id | ap-mac ap-mac } [ radio radio ]





dev-id device-id

Specifies the ID of an AP.

The device ID must exist.

ap-mac ap-mac

Specifies the MAC address of an AP.

The MAC address must exist.

radio radio

Specifies radio ID of an AP.

The value is an integer that ranges from 0 to 2.

Three radios are available only on the AP4030TN, AP4051TN, and AP8050TN-HD.


All views

Default Level

1: Monitoring level

Usage Guidelines

Use Scenario

APs' neighbor information reflects the APs' locations and neighbor relationships, helping you plan the network.

If a neighboring AP is an authorized one, the system displays the power of signals received from the neighboring AP as well as the path loss.

If a neighboring AP is an unauthorized one, the system displays only the power of signals received from the neighboring AP.


The radio calibration function has been enabled using the calibrate enable { auto | manual | schedule time } command.


# Display information about neighbors of the slave AP with the ID of 10 on the leader AP.

<Huawei> display ap neighbor dev-id 10 radio 0
Radio: Radio ID of AP
Dev ID: Device ID of AP
In control AP:
Radio  Dev ID  AP MAC          Channel  Received RSSI(dbm)  Path loss(db)
0      20      9c50-ee7b-a810  4        -16                 44
Total: 1

Uncontrol AP:
Radio  BSSID          Channel  RSSI(dBm)  SSID
0      7079-90ac-7100 1        -32        2g-se
Total: 1
Table 9-4  Description of the display ap neighbor command output



In control AP

Authorized neighboring AP.

Uncontrol AP

Unauthorized neighboring AP.


Neighboring AP detected on an AP radio.

Dev ID

ID of a neighboring AP.


MAC address of a neighboring AP.


Channel that the authorized neighboring AP uses.


The device displays only information about neighboring APs detected on the current channel.

Received RSSI(dbm)

Strength of signals received from neighboring APs.

Path loss(db)

Path loss.


Basic service set identifier (BSSID) of an unauthorized neighbor.


Channel that the unauthorized neighboring AP uses.


Power of signals received from the neighboring AP, in dBm.


Service set identifier (SSID) of an unauthorized neighbor.

Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203778

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next